Pay in installments of $5.37 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 13 - Oct 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
can i use an aquarium light to grow plants PhotonTube™ T8 LED Grow Light Tube for Planted Tank & AquariumAvailable in 4000K or 6500K to simulate natural sunlight Full spectrum coverage from 420 nm to 800 nm with optimized spectra for plant growth and aquarium health 1. 8 umols J efficiency 33 umols sec photon flux output 95 CRI and R9 > 80 Input voltage: 120, 208, 240 or 277 V AC G13 (Medium Bi pin), not polarity sensitive (single or double ended compatible) Works with both shunted and non shunted tombstones TriplePlay compatibility technology
- Available in 4000K or 6500K to simulate natural sunlight
- Full spectrum coverage from 420 nm to 800 nm with optimized spectra for plant growth and aquarium health
- 1.8 umols/J efficiency
- 33 umols/sec photon flux output
- 95 CRI and R9 > 80
- Input voltage: 120, 208, 240 or 277 V AC
- G13 (Medium Bi-pin), not polarity sensitive (single or double ended compatible)
- Works with both shunted and non-shunted tombstones
- TriplePlay™ compatibility technology automatically detects your fixture type. Works with existing T8 fixtures and ballasts (no rewiring of fixture) or ballast bypass (rewiring) - your choice.
- 18 Watt power consumption
- 48" in length
- Rated for use in damp locations
- 50,000 hours lifetime, 5 year warranty
- Available in packs of 4 tubes or 24 tubes
- Free standard shipping to USA addresses
- In stock
- See our delivery policy here
Product Overview
PhotonTube™ is a new LED tube product line that has its light output tuned to the spectral and intensity needs of growing plants and keeping fish healthy. The T8 PhotonTube™ offers 33 umols/sec of photon output, with spectral coverage across the PAR spectrum from 420 nm to 800 nm.
Our PhotonTube™ LED grow lights are available in 4000K and 6500K, with 95 CRI and R9 > 80 - this indicates a color spectrum that comes very close to natural sunlight.
Because this is a full-spectrum product, the resulting light output is a soft white color that simulates natural daylight. The high CRI rating ensures that your coral colors will pop, and fish colors appear as natural and vivid.
These T8 LED tubes are UL Type A and Type B compatible, meaning they can be used with or without a fluorescent ballast. Plug it in directly to your existing T8 fixture, or a new fixture with the ballast removed - whatever is easier!
Waveform Lighting 100% Quality and Satisfaction Guarantee
If you're not 100% satisfied with the performance, color or quality of your product, we'll work with you to make it right.
Simply contact us within 30 calendar days after delivery and we'll send a replacement at no additional charge, or offer you a full refund.
- See our full returns & refunds policy here
- See our warranty policy here
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 8 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Easy peasy
Size: 1 Panel, Color: Black
Bought this single-panel room divider for my son so he has a little privacy when he has to keep his camera on for online classes.
It’s lightweight, easy to set up, and does the job—he can focus without me photobombing in the background. He can feel like he has his own tiny corner office, even if it’s just the basement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
★★★★★ 5
It serves it's purpose!!
Size: 1 Panel, Color: Black
Product really works well & serves it's purpose! Great height & width. It's flimsy, but it will stand still when put in place.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2025
★★★★★ 1
Zero stars
Size: 1 Panel, Color: Black
The bars are impossible to screw in all the way so it’s not sturdy at all, trash and waste of time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
★★★★★ 5
Great product, sturdy and well made. Easy assembly.
Size: 3 Panel, Color: Beige
These are awesome! They were easy to assemble. They are lightweight and easy to move. I was able to easily put all 6 pieces -(I ordered two sets)-into the back of my SUV at once, by myself (and I'm a short, older lady). Quality material. Very sturdy and steady. The first set I opened was a used one and did not include instructions, but it was still very easy to assemble and figure out. I recommend using a battery powered screwdriver. With that, the assembly of all 6 panels took less than 45 minutes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 24, 2025
recommand products
White the Lily of Valley Hair Claw, Unique Flower Hair Claw, Hair Claw Gifts, Claw Clip Hold Thick Hair, Flower Hair Jewelry, Comfort Wear
21.67
Karin's Garden Martha 4" Yellow Tiger Lily French Jaw Clip. Hair Clip. Flower Hair Accessory. Made in the USA. Lifelike Lilies
29.61
White Waterlily Hair Clip
21.62
Lavender Heather Spray – House & Harbor
27.97
1pc Bohemian Style Artificial Lily Flower Hair Clip
25.92