SKU: 37919563158
philodendron stencil

philodendron stencil Monstera Leaves Stencil - Large Tropical Philodendron

Sale price$22.40 Regular price$24.89
Save 10%

Pay in installments of $6.22 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

philodendron stencil Monstera Leaves Stencil - Large Tropical PhilodendronUsing laser cut Mylar film and paint, it is very easy even for the beginner, to produce stencil work of HIGH QUALITY on Furniture, Walls, Floors, Fabrics, Windows and almost any other flat or lightly curved surface. If you haven't got the stamina for a whole wall a combination of similar stencils can add a bright splash of color. Large stencils make a stunning accent on an empty wall, try them near a sofa or table or even by the skirting board of

Using laser cut Mylar film and paint, it is very easy even for the beginner, to produce stencil work of HIGH QUALITY on Furniture, Walls, Floors, Fabrics, Windows and almost any other flat or lightly curved surface.

If you haven't got the stamina for a whole wall a combination of similar stencils can add a bright splash of color. Large stencils make a stunning accent on an empty wall, try them near a sofa or table or even by the skirting board of pretty much any wall space that needs that extra something.

Stenciling is fun for the whole family but BEWARE it is very addictive!


HOW TO STENCIL

Virtually any paint can be used to stencil with, but the two most popular types are Acrylic and Dry-brush Oil.

Preparation
Always make sure that the surface to be stencilled is clean and properly prepared with no flaking paint.

Instructions
Spray the back of the stencil lightly with spray glue and position the stencil on the chalk line or registration mark.
Paint: Dip your brush or sponge into the paint then, wipe off most of it on a piece of kitchen paper. If you use too much paint you will find that it bleeds behind the stencil, giving the pattern very ragged edges.
Apply the paint using an up and down stippling motion, start on the outside of each of the stencils cut outs and work your way in towards the middle.
Clean-up: Wash your stencil frequently in hot soapy water, especially when changing colour. Don't forget to check for paint on the back of the stencil. To remove oil paint and glue from your stencils and brushes soak them in turpentine for a few minutes.
Virtually any paint can be used to stencil with but the two most popular types are Acrylic and Dry-brush Oil.

Preparation
Always make sure that the surface to be stenciled is clean and properly prepared with no flaking paint.

Instructions
Spray the back of the stencil lightly with spray glue and position the stencil on the chalk line or registration mark.

Paint: Dip your brush or sponge into the paint then, wipe off most of it on a piece of kitchen paper. If you use too much paint you will find that it bleeds behind the stencil, giving the pattern very ragged edges.
Apply the paint using an up and down stippling motion, start on the outside of each of the stencils cut outs and work your way in towards the middle.

Clean-up: Wash your stencil frequently in hot soapy water, especially when changing color. Don't forget to check for paint on the back of the stencil. To remove oil paint and glue from your stencils and brushes soak them in turpentine for a few minutes.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 37919563158

Discover Niche Categories That Outsell philodendron stencil

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 21 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Reviewer JR
Phoenix, US
★★★★★ 3
Not as good as I expected
When it first came, the box fell apart as I was taking it out, and a lot of some kind of dirt or sand kept falling out all over my table and floor. I had the take the entire thing apart and thoroughly wash it. After drying age reassembling it, I tried it on my portafilter that came with my Breville Barista Express, but, somehow, it doesn't always make the tamping level. You would think with the ridge that rests on the side of the portafilter that it would force it to remain level, but, somehow, it doesn't, at least not consistently. It also has varying lengths (heights, or depths), and a single spring tension, so you may still over tamping or under-tamp. I was expecting it would have a censor that would just detect once it reached 30 lbs of force and cut off after that, similar to a torque screwdriver, but that's not what this is. I'll still give it 3 stars because, despite the problems mentioned above, it at least produces some amount of consistency, even if that isn't measurable; but, I can't give it 5 stars because of those issues mentioned above.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 7, 2025
B
Verified Purchase
Bernard Eisenfeld, M.D.
Phoenix, US
★★★★★ 5
This is the one.
Size: 58.3mm, Color: Black
As an el Supremo Coffee Geek, I've wasted money on lots of different tampers. Save your money and buy this one or it's equivalent. This thing is heavy duty, solid, well-made, self-leveling, tamps at 30 pounds and is fool-proof even for fools. Also, it's a palm tamper meaning more fun and more satisfying to use as you prep the puck for your morning buzz. Buy it. You will thank me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2024
L
lesserof2weevils
Houston, US
★★★★★ 5
Super easy to use and takes the guess-work out of getting even pressure on the grounds
Size: 58.3mm, Color: Black, Size: 58.3mm, Color: Black
I have been using a hand tamper for many years and have a good idea of the pressure I am applying to the grounds in the portafilter. I honestly considered spring tampers to be a bit silly. But this tamper really does take the guess-work out of pressing the coffee grounds. The shroud helps guide the press so that pressure is applied even and flat across the surface. With the manual tamper, there will be some play when pressing, or some unevenness in pressure. This is especially true when cranking out many espressos during a breakfast party with friends. Having the spring tamper makes quick work of turning out a lot of coffees with consistency. There are no instructions for taking this tamper apart to clean inside, and you may not really need to do that very often. After each use, just pull back the shroud (the black piece that moves up and down) and wipe off the tamper (the shiny steel part). This will help prevent grounds from working their way inside. If you do want to take it apart, it’s easy. Pull back the shroud and unscrew the tamper. It will come apart into three pieces. Wipe the pieces off and reassemble. Super quick and easy. This tamper is very heavy. My scale shows 656 g (about a pound and a half). It fits the portafilter exactly, with no slop. Just place on top of grounds and press!. Don’t even worry about pressure, just push down all the way. Overall I had fun using this tamper versus my manual one. And since I make myself a cappuccino very early in the morning, I don’t have to be very awake to get a good pack on the grounds and get my coffee fast!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2024
C
Verified Purchase
Cooper
Alexandria, US
★★★★★ 5
Great upgrade
Size: 54mm Fits Breville Barista/Bambino/Infuser
I just got a Breville barista express for Christmas and was searching for upgraded tools. I stumbled across this accessory kit and was worried about the quality. I’m pleased to say I’ve very happy with the quality for the price that you get these for, all the tools are heavy and feel sturdy. My coffee is much better not. This fits the barista express perfect. The metal design is very nice in the hands and easy to use. Functions exactly as I would expect. Overall great buy for anyone looking for an affordable upgrade.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026
L
Verified Purchase
~Life Is Beautiful~
San Leandro, US
★★★★★ 5
Quality well made kit, happy with my purchase
Size: 54mm Fits Breville Barista/Bambino/Infuser
I am so glad I went ahead and purchased this 7 piece espresso accessories kit! All the tools included are very well made. The tamper is exceptional, sometimes the spring can get misaligned, as I have read with pretty much all tampers, the set is made Well. I have not had any problems. I'm very well satisfied with the upgrade. The appearance is quality and feels heavy and expensive. I searched for many of these espresso accessory kits, and I'm glad that I went with this one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026

recommand products