Pay in installments of $6.76 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 16 - Oct 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
britax one4life clean comfort Britax One4Life Slim All-in-One Car SeatThe One4Life Slim all in one car seat takes your child from birth to big kid with trusted Britax safety, ClickTight installation, and a slim SpaceSaver design. As a convertible and harness 2 booster seat in one, it grows with your child for 10 years. It starts rear facing with an extended capacity of up to 50 lbs., so your child can ride rear facing longer. It easily converts to forward facing toddler mode (up to 65 lbs.) and high back belt
The One4Life® Slim all-in-one car seat takes your child from birth to big kid with trusted Britax safety, ClickTight® installation, and a slim SpaceSaver™ design. As a convertible and harness-2-booster seat in one, it grows with your child for 10 years. It starts rear-facing with an extended capacity of up to 50 lbs., so your child can ride rear-facing longer. It easily converts to forward-facing toddler mode (up to 65 lbs.) and high-back belt-positioning booster mode (up to 120 lbs.) when your child is ready. With a slim outside and spacious inside, the 17.5” seat is designed to fit 3 across* without compromising safety and comfort. ClickTight helps you install with confidence, every time. The base and shell are easy to wipe down for hassle-free cleanup. The car seat cover is safe to machine wash and dry, and it’s naturally flame-retardant with no added FR chemicals. One4Life Slim features a high-strength steel frame, a SafeCell® crumple zone, and a V-shaped tether. As your child grows, you can easily adjust the 15-position no-rethread harness and headrest with one hand. With cooling channels, premium padding, three infant inserts, and built-in armrests, your child will love every ride.
- All-in-One Car Seat: One4Life® Slim is a convertible and harness-2-booster seat in one!
- It easily converts from a rear-facing infant and toddler seat (5-50 lbs.) to a forward-facing seat (30-65 lbs.) to a high-back booster seat (40-120 lbs.)
- 10 Years of Use: This slim all-in-one car seat grows with your child from 5 to 120 lbs. and up to 63” tall
- ClickTight® Installation: Install with confidence in 3 easy steps: pinch to open, thread and buckle, click it closed!
- SpaceSaver™ Design: Slim outside, spacious inside! The 17.5” seat is designed to fit 3 across without compromising on trusted Britax safety and premium comfort.
- Premium Fabrics: The woven mélange accents give the car seat cover a tailored look, while the soft knit fabric on the padding and inserts helps keep your child comfortable during every ride
- Woven Accents on the Exterior and Comfort Pads: Made from recycled polyester
- Hassle-Free Cleanup: Extra space between the shell and base means you can clean under the seat with ease – and with minimal grooves in the seating area and base, you can wipe it down with no fuss
- SafeWash® Fabrics: No more hand-washing or waiting for the cover to air-dry; just quick and easy cleanup so you can keep moving
- Naturally Flame-Retardant Cover: With no added FR chemicals
- Three Removable Infant Inserts: Help provide a better fit for infants 20 lbs. and under
- Accessible Color-Coded Belt Paths: Make it easy to route the seat belt through the correct path for each car seat mode
- Slide-Out Cup Holders: The dishwasher-safe cup holders slide out with ease for convenient cleaning and click back into place for a secure attachment during rides
\Cup-Holder-Free Option: Remove the cup holders completely and insert the armrest caps to save additional space - 15-Position No-Rethread Harness and Headrest: Adjust together quickly and easily with one hand to help create the proper fit as your child grows; no rethreading, ever!
- Patented V-Shaped Tether with Staged-Release Stitches: Helps slow and reduce forward movement during a crash
- High-Strength Steel Frame: Reinforces the seat structure to help keep it sturdy and stabilized
- Quick-Push, 9-Position Recline with Easy-Read Indicators: Helps you find the most comfortable fit for your child and the correct angle for your vehicle
- SafeCell® Technology: Acts as a crumple zone, absorbing crash energy to help keep it away from your child
- Two Layers of Energy Management: The protective seat shell and foam-lined headrest help absorb impact energy and are designed to help keep your child's head, neck, and body safe
- Soft Comfort Pads: Help prevent the harness from rubbing against your child’s skin
- Flip-Forward Buckle Pad: Stays out of the way for easy boarding; made with extra padding for premium comfort
- Built-In Cooling Channels: Improve airflow to help keep your child comfortable
- Plush Padding: For superior comfort and a quiet ride
- Easy-Pull Harness Adjuster: Lets you tighten the harness using just one hand
- Harness Holder Slots: Keep the harness straps out of the way while your child gets in and out of the seat
- 5-Point Safety Harness with Diamond Weave Webbing: Provides adjustment points at the hips, shoulders, and between the legs
- Tag-Free Headrest: Supports your child’s head and neck without irritation
*Britax cannot guarantee 3-across fitment in all vehicles.
Specifications
- Dimensions: 24.5"H x 18.5"D x 17.5"W
- Weight: 28 lbs.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 13 reviews
Sort
Product Reviews
★★★★★ 5
Fantastic Product
Size: 13"-27", Style: Single, Size: 13"-27", Style: Single
The Wali Single Monitor Desk Mount works better than I expected.
First, the basics. The mount comes well packed and the instructions are very simple to understand. There is so little assembly required that the instructions are almost not needed. Assembly and installation can be done in less than ten minutes (not including cable management if you choose to use that feature). Adjusting everything is easy. Overall quality of the parts and the assembled product are quite good.
I have two monitors that I wanted to mount on a flat desktop. I needed to be able to get the monitors right next to each other and still have the desk flat against the wall. Most double monitor stands will not allow for this unless your monitors are the perfect size for the spread of the arms. The movable arms will usually flex toward the wall if you want the monitors to be edge-to-edge with each other. The result is the desk having to be offset from the wall to accommodate this. By using two single monitor stands, I am able to move the posts to positions that allow the arms to be extended in such a way that everything is flat with the wall.
The other frequently stated issue with most monitor stands is that the arms have hydraulic pistons and/or springs to deal with the weight of the attached monitors so they are easy to move up and down. These pistons and springs are often of poor quality and either fail quickly or don't work as expected from the get-go.
This is not a problem with the Wali Single Monitor Desk Mount. The arm is solidly attached to the 16" pole and only moves up and down by loosening the arm mounting and sliding the arm up or down on the pole. The arm, once set to the desired height, can be move forward, backward, side-to-side and tilt. This makes for a much sturdier setup with no pistons or springs. This system works very well, since I (and I think most people) have little need to move a monitor up or down after the initial installation.
I leave the included Allen wrench stuck in one of the vertical facing screws behind a monitor so that it is always handy but out of sight. If I do need to move the monitors up or down, the tool is right there.
I will buy two more of these for my wife's desk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 3, 2024
★★★★★ 5
Rock-solid tall mount to hold a monitor above a large monitor
Size: 13"-32", Style: Single, Size: 13"-32", Style: Single
I bought the 31.5 model to mount a 27" monitor above a 32" monitor on my desk. This is the first monitor mount I have ever purchased and I am thrilled with the entire mount! The installation instructions were simple to follow. All hardware was clearly notated and packaged by part number. The mount holds the 27" monitor (which isn't all that light) perfectly above my desk monitor and is very stable. Adjustment is easy and effective and It doesn't wobble one bit.
The cable routing clips work well and are literally a snap to install. I used the clamp mount but a screw-down desk mount is included.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2025
★★★★★ 5
Quality Stand
Size: 13"-27", Style: Triple
Solid, heavy duty and well made. I purchased this as I was adding a third monitor to my setup. So I had to choose between buying a 2nd mount that had one arm on it, or just replace my 2 arm setup with a single 3 arm setup. I'm glad I went this route. Very easy to assemble and it feels heavy duty. I've been using it daily for about 2 months now and it's held up perfectly. Zero issues with assembly and the instructions are well written. The mount options are solid and the metal is thick. Quality product at an amazing price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2025
★★★★★ 4
Overall, very good for the price.
Size: 13"-32", Style: Single, Size: 13"-32", Style: Single
For the price, I’m pleased with it.
Overall, it’s a sturdy stand with quality machining. All the screws went in easily, poorly machined products have crooked holes or bad threads. The mount base comes with 2 types, standard mount for a desktops surface. The other one is for desktops with monitor holes/cabling drilled through them. All the parts are heavy gauge and I encountered no difficulty during assembling.
There seems to be a tension screw for the tilt feature. I had to tighten the screw that holds the tilt joint together because out of the box, the monitor flopped forward hard. I had to be mindful while mounting it to the main arm so it wouldn’t slam into my glass desktop.
The 2 arms that allow you to move the monitor forwards and back, left and right were a little stiff, I loosened the screw a bit on the main arm, at the pole. That seemed to be all that was required. I tried to loosen the bolt where the 2 arms meet, and it wouldn’t budge. I didn’t force the issue.
The instructions were adequate for assembly without covering anything else, like adjusting the tilt bolt for the weight of the monitor.
So, while I think this was a good mount for the investment, there are tradeoffs to mention.
I’m accustomed to swinging my monitors upward and dusting underneath them. Height is fixed by a screw on this one.
I was struggling to install the monitor cables when I realized you can tilt the bottom toward you until the top or the monitor hits the pole, or, until it’s sitting nearly flat like a table. Elevated several inches above the desktop. I consider this a Pro / Con feature.
Where the arm ties into the VESA mount, the fit is a little sloppy. It’s not a safety concern but I can wiggle the monitor backwards and forwards at the outer edges “About ¾ inch “before feeling any resistance from the mount. Same goes for tilting. I don’t see this as much of an issue. Normally, I don’t foresee any outside forces acting in the monitor to create a problem. However, there’s room for improvement. The rest of the machining seemed steller.
I have multiple computers in different rooms. 32” monitors are used as primary monitors with 32” to 23” as secondaries.
I like mine roughly 1” above the desk. That places the top of the monitor at my eye level and the ideal viewing angle.
I have fully articulated, hydraulic mounts on most of my monitors. Nice ones for large heavy monitors run $75 to $100 and up.
I paid $36 for this one. The……… WALI Monitor Arm Mount for Desk, Single Extra Tall Computer Desk Mount, Monitor Bracket Mount Stand Single, up to 32 inch, 22 lbs (M001XL), Black.
Amazon lumps the reviews of similar products together, so I specified which mount I purchased.
I’m using this one on a glass desktop, I’m attaching it to the same point I constructed from wood for a different mount. It didn’t lower the monitor low enough either. So, the top of that mounting point is 4” lower than the surface of the glass top.
Despite being that low, I didn’t actually need the 32” pole / monitor mount, the 16” model would have worked.
There’s still 2” of pipe available above the arm. The 32” was on sale & I didn’t know if the 16” would suffice. The pole is a screw together 2 piece. I unscrewed / removed the other pole as it looked out of place in my dual computer setup.
That leaves a hole in the top of the pipe / mount. I wish they included a cap for that. The top pipe has a cap but of a different diameter.
I’d like to give it 4 ½ Stars but Amazon won’t let me. I’ve got to go with 4.
Height adjustments with heavy monitors and an Allen wrench can present a challenge, it’s the nature of the beast and I won’t give it 5 stars for a few reasons. The sloppy VESA mount and loose tilt motion. No instructions that cover that, or if I was supposed to loosen the arm at the pole to improve motion.
I would recommend this mount to others.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 18, 2024
★★★★★ 5
Excellent mount, especially if you want your monitor mounted higher above the desk.
Size: 13"-32", Style: Single
This is the monitor mount I should have had all along. The extra tall pole allowed me to mount my 32" monitor at the correct height (something I couldn't do with the spring-mount I previously had. It came with good directions, everything needed for install except for a Phillips head screwdriver and a 10mm wrench for one cap nut. The arm that holds the monitor is highly adjustable, and once everything is tightened down, very sturdy. I recommend this one without reservations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 1, 2026