Pay in installments of $6.33 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 15 - Oct 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
rt12120 battery peg perego 12V Peg Perego Battery 12 Volt 12AH IAKB0501 BlueGet your kids car up and running again with this Factory Direct OEM 12 Volt Peg Perego Rechargeable Toy Car Battery. You are going to love seeing the smile on their face while they have fun cruising around. This Battery Is Compatible With The Following Models: John Deere Polaris Ducati 12 Volt Two Speed Riding Vehicles 12V Peg Perego Battery 12v 12AH IAKB0501 Blue Specifications: Part Number: IAKB0501 Voltage: 12 Capacity: 12AH Battery Cell Type:
Get your kid’s car up and running again with this Factory Direct OEM 12 Volt Peg Perego Rechargeable Toy Car Battery.
You are going to love seeing the smile on their face while they have fun cruising around.
This Battery Is Compatible With The Following Models:
- John Deere
- Polaris
- Ducati
- 12-Volt Two Speed Riding Vehicles
12V Peg Perego Battery 12v 12AH IAKB0501 Blue
Specifications:
Part Number: IAKB0501
Voltage: 12
Capacity: 12AH
Battery Cell Type: Sealed Lead Acid
Length: 17.78cm
Width: 11.43cm
Height: 12.7cm
Weight: 4.20 kg
Terminal Type: Blue Top - SLA3041
Features:
-
Rechargeable
-
Replacement or spare battery for all John Deere, Polaris or Ducati 12-Volt, two speed children's riding vehicles
-
Sealed, maintenance free, high capacity battery
-
Recyclable
-
No Memory Effect: Maintains Original Charge Capacity and Holds A Strong Charge With Each Use.
-
Internal, Self Resetting Fuse
-
OEM Factory Direct Battery
-
6 Month Warranty
-
30 Day Money Back Guarantee
Their toy will feel like new again once you install your new battery.
Remember, the battery should be fully charged before taking the car out for its first spin.
Notes:
This battery is for use with Peg Perego 12-Volt 12 Amp Hour vehicles.
Be sure to read the enclosed instruction booklet for important safety information before installation and use.
-
For use with a Peg Perego vehicle that requires a 12V, 12 AH lead acid battery
-
This product does not include a charger. Please use the charger that was included with your Peg Perego vehicle to charge the battery or you can purchase an OEM charger from us.
-
Before first time use, you must charge the battery at least 18 hours (but no more than 30 hours)
-
Always recharge for at least 14 hours (but no more than 30 hours)
-
IMPORTANT: Prevent premature battery failure by fully charging battery before storage
Using the wrong battery may cause serious damage or injury, please confirm that this is the correct part for your model before purchasing and installing.
(BATTERY IS FOR ADULT USE ONLY)
How To Keep Your Peg Perego Battery Healthy
We recommend you use the correct charger with your new battery.
Additionally… to help you extend the life of your battery, after each use, you should charge it immediately.
You should never run down batteries and let them sit in a discharged condition for long periods of time.
It's a good idea to recharge the battery every three months when the toy is not in use.
This is important during the winter when the toy might not be used for a while.
Also, be sure to store your battery inside your home or in a warm dry place during winter, rain, and cold days.
If your battery sits for too long, there's a possibility the battery will lose its capacity to hold a strong charge. So, be sure to keep your battery charged to maximize its lifespan.
Keeping the battery maintained and properly charged will ensure that when the toy is being used it will run strong.
There is limited stock available, don’t delay and place your order today.
Batterie Peg Perego 12v 12ah
Need A Bigger Battery? Check out the Yellow 24V Peg Perego Battery below
https://brsbattery.com/products/peg-perego-24v-12ah-yellow-battery-iakb0020
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo.
Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side).
I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure.
The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried.
I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable.
The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's.
Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020
★★★★★ 5
Love my center table
Color: Black-new, Material Type: Glass
Beautiful beautiful beautiful 😍😍😍😍 easy to setup, functional fit the space well could be a bit thicker for but it is ok
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026