Pay in installments of $5.04 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 28 - Oct 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
clay for making plant pots GrowOya 1020-6 Vessel Pot Planter LargeThe Oya is a porous clay vessel that is planted in the ground to naturally water your garden reducing water waste and watering time. Add an Oya before, during or even late into the season. Water radiates out of the Oya covering areas of 2' (Small), 3' (Medium), or 4' (Large). Read more Use an Oya watering pot for effortless home garden irrigation. Old is new again with these beautiful and simple water saving porous clay irrigation vessels called Oyas
The Oya is a porous clay vessel that is planted in the ground to naturally water your garden - reducing water waste and watering time.
Add an Oya before, during or even late into the season. Water radiates out of the Oya covering areas of 2' (Small), 3' (Medium), or 4' (Large).
Use an Oya watering pot for effortless home garden irrigation. Old is new again with these beautiful and simple water-saving porous clay irrigation vessels called Oyas - traditionally called "ollas." An ancient form of localized plant irrigation, Oyas are planted in your garden to water slowly at the roots, saving water and making growing easy.
Just fill your Oya with water every few days and the rest is taken care of. Plant roots instinctively grow toward the porous clay of the Oya which allows them to take exactly the water they need when they need it, no more no less. The result is less water, easier growing and a more successful garden. Each Oya comes with a custom-fit silicone lid.
Add an Oya before, during or late into the gardening season. The Oya Watering Pot can be easily added in between your existing plants to immediately see water and time saving benefits. Please note, you may still need to surface water for 1-2 weeks until the roots have found the Oya.
Features & Benefits:
- Take care of your watering from patio pots, planters and garden beds
- Conserve up to 70% of your garden's watering needs
- Decrease the amount of watering to as little as once a week
- Available in three sizes for any shape or size garden
- Roots will naturally grow towards the Oya, taking what they need
- Add an Oya to your garden at any time during the growing season
- Silicone lid decreases evaporation and ensures nothing drops into the reservoir
Please note, we do not recommend putting fertilizers into your Oya. Most fertilizers are not 100% soluble, potentially clogging the porosity of the Oya. Instead, apply the fertilizer around where the Oya is buried so that the roots will have easy access to nutrients.
Sizing:
Small Oya
- Waters a garden space up to 2 feet in diameter
- Capacity: 1.1 quart (1 liter)
- Dimensions: 5" wide x 7" high
- Designed for patio or porch pots and planters
- Perfect for 5-15 gallon pots/grow bags
Medium Oya
- Waters a garden space up to 3 feet in diameter
- Capacity: 3.2 quarts (3 liters)
- Dimensions: 7" wide x 10" high
- Perfect for planter boxes, small raised beds and larger containers
- 3' x 6' raised bed is perfect with 2 medium Oyas
- Easily water 15-30 gallon grow bags
Large Oya
- Waters a garden space up to 4 feet in diameter
- Capacity: 6.8 quarts (6.5 liters)
- Dimensions: 10" wide x 13" high
- Perfect for 4-foot wide raised beds and larger, flat garden beds
- Easily water 30+ gallon grow bags
Care & Maintenance:
We recommend removing the Oya watering pot at the end of the growing season to keep it in top shape. Remove plant growth and wash with 10 parts water and 1 part vinegar (a stiff brush can help), then let it air dry before storing.
If you live in a climate at risk of frost, remove it from the ground before the frost and bring it indoors. Due to the porous nature of the clay, the Oya can be susceptible to cracking or shattering in freezing temperatures.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 5
Buy this one, forget the rest
This is one of the most powerful handheld electric blowers available. If you're serious about getting the job done quickly, this is the baseline. The next power tier is a gas backpack blower at five times the cost, then an even more powerful backpack, and then four-digit specialty tools from companies like Billy Goat. I bought the Worx because I didn't want to spend three hours raking a half-acre of grass.
My trial run was an hour of continuous use with matted wet leaves and driveway sand. It fast became apparent that to be efficient, a blower has to move leaves without being on top of them. Blowing from six inches just makes everything scatter as piles build up. You end up crisscrossing the section you just cleared to deal with the strays. The further your breeze carries, the more direct the flight path of the leaves. This range, and the ability to scour stubborn leaves from the ground, comes from air speed (MPH). At the same time, though, you need a big enough wall of air to move more than one leaf at once. That comes from the size of your pipe opening. The two multiplied together determine your total air volume over a duration, or CFM (cubic feet per minute).
In physics-land (with spherical cows and turbulence-free pipes, spared from the icy hand of marketing), CFM is the best measure of a blower's work capacity. MPH, you can change by varying the size of the pipe; a smaller pipe makes a smaller column of air moving at a faster speed (and more impressive advertising), which is why a lot of consumer-class blowers have tiny nozzles. (I'm looking at you, Sun Joe SBJ601E.) But there's a cost to adding MPH: it kills efficiency. The energy to move a volume of air goes up with the square of speed, so if you design your blower for 160 MPH, you'll get half the CFM of a 110 MPH blower from the same power. Something to mull if the blower is powered by a battery.
Still, if you know either speed or CFM, and the size of the pipe, you can calculate the other (assuming the manufacturer isn't misleading you by quoting CFM at the fan and MPH at the end of the pipe). To get CFM from MPH and the radius of a round pipe, the calculation is (radius^2)*(mph)*(1.92). That's (1.69^2)(110)(1.92) for this blower's 110 MPH and 3 3/8" pipe, with the result arriving right at the rated number of 600 CFM.
Anyway, the Worx has enough volume and speed to blow mounds of wet leaves from six feet and dry ones from ten or more. It's impressively powerful. I was switching arms every few minutes as they wore out from the backward force. Only some really baked-on mud would have benefited from a pipe-reducer attachment. Thanks to ape-like proportions or the secure fit of my spandex leaf-blowing onesie, clothing suction from the rear-directed air intake hasn't been a bother.
ALTERNATIVES:
I almost bought Toro's highly-rated "Ultra" combination blower to minimize bagging, but the vacuum functionality didn't seem that useful in videos. Maybe it'd be adequate to clean an enclosed deck area or a small yard with a scattering of dry leaves. For a larger yard, it looks like a time sink relative to a standalone mulcher. Likewise the blowing capacity, which, at 410 CFM, trails the Worx by quite a lot.
Cordless tools were also tempting. There's a 20V DeWalt people seem to like that's rated at (a perhaps optimistic) 400 CFM. Because it's a similar fan design to the Worx, we can compare power directly. DeWalt's standard battery is 20V (or so we'll stipulate; it's closer to 18V under load) and 5 amp-hours, so we're looking at 100 watt-hours total output. 15 minutes of runtime translates to a sustained draw, best case, of 400W. Assuming 90% efficiency in the brushless motor, that's 360W actually moving air. (When new. Expect a performance drop over time and battery replacements by year three.)
Compare this Worx: 12 amps at 120V equates to 1440 watts sustained, in this case feeding a 2-pole AC/DC motor that's perhaps 55% efficient. 12A is close to the maximum a device can reasonably expect from a typical 15A household socket. Even with nearly half of our power lost to heat and noise, the remaining 790W is over double what the DeWalt can manage. It's no coincidence that 600 CFM cordless blowers (Greenworks and Kobalt come to mind) have 80V/2.5Ah batteries with twice the DeWalt's capacity. Their runtime at full tilt? The same fifteen minutes, with three extra pounds to lug around from a chunk of lithium that costs more than the blower it attaches to.
And what of gas blowers? The handheld versions have around 1 HP with CFM from 450 to 500. They're usually tuned for higher MPH than the Worx, so they're likely to be a little better with wet leaves and a little worse with dry ones. Backpack blowers up the displacement and make between 1.5 and 5 horsepower. The models that you might find on the back of a professional landscaper can manage nearly 1000 CFM with speeds around 200 MPH. That's a considerable difference, but you pay for it at the checkout and in weight: figure 10 pounds or so for a handheld (relative to 7ish for this unit, plus some cord) and 20 or more for a backpack.
As of mid-2020, two other corded blowers are worth a hard look: Toro's F700 and Worx's WG521. The Toro arrived first in 2019 with a hefty 720 CFM rating, a bigger two-arm handle, and a better cord retention mechanism. The WG521 is the response: 800 CFM and 135 MPH (claimed) from a ~4" nozzle, albeit still intended for one arm. All three blowers are beastly and often close in price; pick whichever best channels your inner Tim Allen.
ACCESSORIES:
A motor this powerful benefits from a thick (low gauge) cord for longer runs. You lose a bit of performance with thinner cord. The generic orange 50-foot extension everyone has is 16-gauge. Feeding a 12A load for 50 feet, it'll have a voltage drop of about 5V. Heavier 14-gauge loses 2.5V on the same run, and industrial 12-gauge, only 1.5V. The scale is linear, so if you double up that 16-gauge cord for a 100-foot run, you'll lop off 10V.
How's that play out here? From a short and fat cable (that the cheesy plastic strain-relief piece won't actually accommodate; just tie an overhand knot over the two plugs instead), we'd expect a 1440W draw (12A * 120V, or a bit less because the house wiring itself has some drop). Losing 5V drops the total to 1380W. That's about what I found when I tested the Worx with a watt meter.
12ag / 3 ft = 1423W
14ag / 100 ft = 1352W
16ag / 50 ft = 1351W
16ag / 50 ft + 14ag / 100 ft = 1280W
With the progressive thumb dial at the lowest setting, minimum draw was 260W.
For shorter runs, disconnect extensions you don't actively need. Every cable sheds a percentage of the energy it carries to heat. As above, skinny cables lose more. Coiled on the ground and coupled with a high-load device like the Worx, they can build up enough heat to start melting insulation, which tends to cause sheepish expressions and insurance claims.
This blower is also loud enough to merit hearing protection. On an A-weighted scale (approximating human hearing), measured outdoors from three feet, it makes 82 dB on low and 91 dB on high. Indoors or near a wall, volume jumps by 10 dB and subjectively doubles. While the sound character emulates a vacuum, my Shark only measures 72 dB indoors; you'd have to run over a rat's nest of lamp cords to make one this loud. Amazon has a number of comfortable muffs for less than a Jackson that'll keep your ears intact.
You can find electric blowers with more toys, but few that'll get the job done as fast as this one. It's a bargain at the asking price. I'll update if I catch any reliability problems.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 1, 2016
★★★★★ 5
Light, and easy to use for blowing leaves
I bought this in the fall of 2025, and found it very easy to use. I also have a Toro blower/vac, that I use to grind up leaves in the fall.
While this appliance is only good for blowing leaves, it does a good job of it. It's quieter than the Toro, and considerably lighter in weight. I find it much less fatiguing on the hand than the Toro.
It has multiple speeds, so is versatile. You don't ALWAYS want maximum wind from these things, depending on the job and the space.
The weight, comfortable handle, balance, and lower noise are the top advantages to this machine.
Because this is a corded model, there's no concern over battery life. You can blow the afternoon away without a care.
Only time will tell when it comes to durability. 🤞🏻
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 13, 2026
★★★★★ 5
Great Power for the Price
Really impressed with this blower. It’s lightweight, easy to handle, and has plenty of power to clear grass and leaves quickly. Perfect for quick yard cleanups. Definitely worth.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 5
The Black and Decker BESTA510 is a KEEPER plus it's made in the USA 🇺🇲
Style: String Trimmer
Well folks🙂 I have to tell you this has been a nice weed eater that cuts really good and it's LIGHTWEIGHT and it's powerful👍 and at a PRICE that can't be beat...it's way more powerful than some battery and electric weed eaters that I have.. like a Ryobi... And supposedly a commercial grade Ryobi $200 😤..
Anyway 🙂 This electric weed eater is very good and I'll take that PEPSI challenge any day 😀 when comparing it to some other weed eaters PLUS it doesn't USE LINE like other electric weed eaters that I've used.. at least that's been my experience..
This is a KEEPER weed eater from Black & Decker👍....it handles tall grass and even some hedge... though it probably shouldn't be used for hedge but it's TOUGH 😀 and better than any battery weed eater I used especially with the power and cutting...
The power alone and convenience of NOT rushing through the job with the battery pack and charging ect imo is worth the cord drag 🙂... and much better than a battery weed eater or other electric weed eaters..
This just cuts better 👍... With MORE power consistently and constantly through the whole job...
So in conclusion 🙂 the Black & Decker BESTA510 weed eater in my opinion is a KEEPER and this model has been around for a while which speaks for itself not to mention Black & Decker has been around for years.... This weed eater OVERALL (pound for pound ) is a solid performer with many mostly liking this weed eater and Black & Decker products overall..
Thanks for reading🙂.. I hope my review helps... and Did I mention It's made in the USA...🇺🇲..🙂...
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2025
★★★★★ 5
No problems all the way to the end of the spool
Style: String Trimmer
I had an old Greenworks string trimmer that I found in the basement after I moved into my new home. Maybe it was just old, but the auto-feed didn't work well, the line was always running out, and I spent more time rewinding the spool than cutting down weeds. I had almost lost my faith in string trimmers entirely. You can spend $300 on one, but how much better are they? I didn't know. This Black & Decker was only $50, and although it's corded, my roommate convinced me it was worth not having to do the dance of recharging batteries, plus having full 110v power. Some (easy) assembly required out of the box, and this thing was basically plug & play. I did read through the owner's manual first, which gave amateur me some confidence through a few helpful tips. I use it not only for cutting down weeds, but also for cleaning out weeds from the cracks in my sidewalk, and the edger wheel is very helpful for that. More importantly, the line had no problems all the way to the end of the spool. Faith restored, there are good string trimmers in the world.
That being said, be aware that the line it comes with isn't very long. My lawn is medium-size, and it ran out about halfway through. The Black & Decker replacement spools are $10 / 30 ft (much longer), but it goes through line, so this could really add up. Replacing the spool was easy, and I was able to finish my lawn with plenty line to spare. A quick search on Amazon reveals off brand spools at $15 / 12-pack. I haven't tested them yet, but the price difference is so great that I'm going to give them a chance.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 19, 2023