Pay in installments of $6.65 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 21 - Sep 26
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
britax pinnacle clicktight harness-2-booster car seat cool flow grey Britax Grow With You ClickTight Harness-2-Booster Car SeatChoose a toddler car seat that grows with your child from toddler to big kid age with the Britax Grow With You ClickTight harness 2 booster car seat. This high back booster seat starts as a 5 point harness car seat and converts into a belt positioning booster that works with your car's seat belt. With ClickTight Technology, you can install with confidence, every time in 3 easy steps: open, buckle and close. Quickly adjust the 9 position harness and
Choose a toddler car seat that grows with your child from toddler to big kid age with the Britax Grow With You ClickTight harness-2-booster car seat. This high back booster seat starts as a 5-point harness car seat and converts into a belt-positioning booster that works with your car's seat belt. With ClickTight Technology, you can install with confidence, every time in 3 easy steps: open, buckle and close. Quickly adjust the 9-position harness and headrest using just one hand for the proper fit as your child grows. Once they’re ready to use the seat belt, the 5-point harness tucks away, transitioning the seat to a belt-positioning booster. The color-coded belt guides help you and your child route the seat belt through the right paths for a secure fit. This forward facing car seat is made with naturally flame retardant fabric and foam that is safe to machine wash and dry. SafeCell Technology in the base acts as a crumple zone to help absorb crash energy for additional protection for your growing child. The protective seat shell and foam-lined headrest help absorb impact energy and are designed to help keep your child's head, neck, and body safe. This booster car seat features armrests, 2 cup holders and harness comfort pads, so even big kids enjoy the ride.
- TWO DIFFERENT MODES: Harness mode is 25 lbs - 65 lbs, 34" - 49" height and booster mode is 40 lbs - 120 lbs, 44" - 63"
- NATURALLY FLAME-RETARDANT FABRICS: The flame-retardant fabrics and foam are safe to machine wash and dry
- COMFORTABLE RIDE: Premium padding improves comfort for your growing child
- STRONG CONSTRUCTION: Made with high-strength steel for reinforcement and stability
- PATENTED TETHER: V-shaped tether features staged-release stitches to help slow and reduce forward movement in a crash
- CLICKTIGHT(R) INSTALLATION: Unobstructed seat belt paths clear the way for confident installation, and the automatic tensioner takes care of the tightening
- SAFETY YOU CAN TRUST: Equipped with SafeCell technology that acts as a crumple zone to absorb crash energy
- QUICK-ADJUST HARNESS AND HEADREST: These pieces move together for easy one-hand adjustments for a proper fit
- VERSATILE BUCKLE: The 2 buckle positions help you get a good fit for your growing child, and the flip-forward buckle flips out of the way for stays out of the way for easy boarding
- COLOR CODING: The color-coded belt guide helps you properly route the seat belt for safe use
- TWO REMOVABLE CUP AND SNACK HOLDERS: Keep drinks and snacks within reach for an enjoyable car ride
- STAY-PUT HARNESS PADS: Soft comfort pads keep the harness straps from rubbing against your child's neck
- WASHER AND DRYER FRIENDLY: Removable cover can go in the washer and dryer for convenient upkeep
- TWO LAYERS OF ENERGY MANAGEMENT: The protective seat shell and foam-lined headrest help absorb impact energy and are designed to help keep your child's head, neck, and body safe
Specifications
- Product Dimensions: 21" x 19" x 25"
- Child Weight: 25-120 lbs
- Forward-facing Harnessed Weight: 25-65 lbs
- Belt Positioning Booster Weight: 40-120 lbs
- Seat Area Depth/Width: 15" / 12"
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 5 reviews
Sort
Product Reviews
★★★★★ 5
Sturdy. Tight fit. No wobble
Size: 2 Pairs / 4 pcs
These are the best ones I’ve found. This order will connect one wire. Luckily that’s what I needed. If you’re doing more than one wire…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast.
I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers.
(I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.)
I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers.
These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug.
I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin.
My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs.
I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals.
These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together.
The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug.
I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
★★★★★ 5
Great wire, great price
Size: 100-Foot, Style: 14-Gauge
There is something about this wire that makes me buy it again and again, and makes me feel like it’s a great value! it’s pure copper strands and it feels, looks solid and as good as anything I ever bought for the sound transmission
The cover is thick, but the wire is still flexible. Looks professional and the white looks better than the old school copper look. Getting the protective sleeve off is a bit of challenge but for me it’s worth it. Have a utility knife, wire strippers and if you have weaker hands, a pair of pliers or something to grip it with to remove from covering wires. It’s worth the effort to me as the results feel solid
I use this with my higher end vintage M&K, Sansui, Pioneer, Timeframe, and other amps, speakers and to my ears, it delivers simple, clean sound at a great price. Don’t buy the hype, buy good wire and call it a day. This 14 gauge even works well with clip posts like on my Sansui 9090DB. 👌
Only thing I would do different, buy the 200ft if you are hooking up Atmos or have multiple equipment. This is my third 100ft in as many months, Lol
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 18, 2023
recommand products
Nearly Natural 10ft Artificial Areca Palm Tree, UV Resistant (Indoor/Outdoor)
28.63
Vitalismo 5ft Artificial Palm Plant in Pot Artificial Palm Tree Faux Tropical Areca Palm Plant for Modern Home Floor Corner Decor
20.64
73" Tall Two Tier Round Plant Stand in Verdi Green – Garden Lovers Club
26.96
4’ UV Resistant Lighted Artificial Palm Tree with 127 Warm White LED Lights (Indoor/Outdoor)
24.64
Trailing Jade 'Senecio jacobsenii'
28.31