SKU: 80579804128
lemon lime philodendron plant

lemon lime philodendron plant Philodendron hederaceum ‘Lemon Lime’

Sale price$26.19 Regular price$29.10
Save 10%

Pay in installments of $7.28 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 14 - Oct 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

lemon lime philodendron plant Philodendron hederaceum ‘Lemon Lime’Neon Color That Instantly Makes Any Room Feel Alive Philodendron Lemon Lime is the turn the lights on houseplantbright chartreuse leaves that glow in a way most greens simply dont. The foliage is heart shaped, fresh, and high impact, giving you that bold color pop look without demanding fussy care. Its perfect for brightening a neutral corner, adding contrast to darker leaf plants, or creating a modern, energetic vibe on a shelf or plant stand. Even a

Neon Color That Instantly Makes Any Room Feel Alive

Philodendron Lemon Lime is the “turn the lights on” houseplant—bright chartreuse leaves that glow in a way most greens simply don’t. The foliage is heart-shaped, fresh, and high-impact, giving you that bold color-pop look without demanding fussy care. It’s perfect for brightening a neutral corner, adding contrast to darker-leaf plants, or creating a modern, energetic vibe on a shelf or plant stand. Even a small pot makes a statement, because the color reads from across the room.

This is also a plant that grows with you. Keep it compact and bushier with occasional pinches, or let it trail into a lush waterfall of neon leaves. Train it up a moss pole to create a climbing, “living column” look, or tuck it into a hanging basket where the vines can spill naturally. It’s a fast favorite for beginners because it’s forgiving, adaptable, and rewarding—when it’s happy, it grows. If you want the easiest way to add big color to your indoor plant lineup, Lemon Lime delivers that “wow” factor quickly.

A Fast-Growing Vine That Trails Or Climbs On Your Terms

Lemon Lime is a heartleaf philodendron type, which means it’s built to vine. In good conditions, it can trail several feet over time, filling out a pot and draping gracefully over edges. If you prefer a fuller look instead of long vines, prune lightly to encourage branching. Each trim can turn one vine into two, creating a denser plant that looks intentionally styled rather than “one long string.” That flexibility makes it ideal for shelves, bookcases, tall planters, and hanging hooks.

You can also train it upward for a more architectural look. Give it a pole or trellis, and the plant will start to climb, often producing larger leaves as it grows. This is a great choice if you want a vertical statement without a massive footprint. Whether you go trailing or climbing, the key is consistent, indirect light and a potting mix that drains well. If you’ve been looking for a vine that grows enthusiastically and stays easy, Philodendron Lemon Lime is one of the most satisfying indoor plants to own.

Light And Water Clarity That Keeps Leaves Bright And Vines Healthy

For the brightest lemon-lime color, place this plant in bright, indirect light—near an east-facing window or a few feet back from a sunny south or west window. It also tolerates medium and even lower light, but the tradeoff is slower growth and less intense color. If vines stretch and leaves space out, that’s your signal to increase light. Avoid direct afternoon sun, which can stress foliage and dull its appearance over time.

Watering is simple: water thoroughly, then let the top 1–2 inches of potting mix dry before watering again. Constantly wet soil is the fastest route to yellow leaves and root issues. Use a well-draining mix (a standard indoor mix boosted with perlite or bark works great) and always choose a pot with drainage holes. In brighter light and warmer rooms, you’ll water a bit more often; in winter, you’ll usually water less. Keep the routine steady, and Lemon Lime will reward you with healthy vines and vibrant, glowing leaves.

Easy Styling For Hanging Baskets, Poles, And Everyday Spaces

Philodendron Lemon Lime is one of the best “anywhere” plants for indoor décor. Hang it high and let vines cascade, or set it on a shelf where it can trail down and soften hard lines. If you want a bigger statement, train it up a pole and let it become a living accent piece. It also propagates easily from stem cuttings, so you can fill out your pot, create a second plant, or share it with a friend.

One important note for households with pets and kids: philodendrons are not considered pet-safe if chewed, so place this plant out of reach if you have curious nibblers. The good news is that it’s easy to position safely—high shelves, hanging baskets, or a plant stand in a low-traffic spot. Give it warm indoor temperatures, moderate humidity (average home humidity is usually fine), and occasional pruning to shape, and you’ll have a bright, reliable vine that looks lush without constant attention.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 80579804128

Discover Niche Categories That Outsell lemon lime philodendron plant

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Elton Smith
Louisville, US
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
H
Verified Purchase
hearmeout
Los Angeles, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Alexandria, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Natrona Heights, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Whiting, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026

recommand products