Pay in installments of $5.72 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 28 - Oct 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
landscape and garden micro spray watering kit Drip & Micro Sprinkler Kit – Greenhouse MegastoreThe Drip & Micro Sprinkler Kit is one of the bestselling kits around, suitable for residential gardens planted with roses, shrubs, groundcovers, flowerbeds and trees. The kit can cover up to 700 sq. ft and can be expanded to cover more than 1000 sq. ft using additional drip tubing, micro sprayers and drip emitters. This kit contains all the parts needed to start a system from a faucet or a garden hose. The kit includes a 3 4" backflow preventer, 3 4"
The Drip & Micro Sprinkler Kit is one of the bestselling kits around, suitable for residential gardens planted with roses, shrubs, groundcovers, flowerbeds and trees. The kit can cover up to 700 sq. ft and can be expanded to cover more than 1000 sq. ft using additional drip tubing, micro sprayers and drip emitters. This kit contains all the parts needed to start a system from a faucet or a garden hose.
The kit includes a 3/4" backflow preventer, 3/4" 25 PSI pressure regulator, 3/4" swivel adapter, 200' of premium 1/2" drip tubing with .600 ID x .700 OD, 50' of 1/4" micro tubing, 11 micro sprayer assemblies with 13" stakes and micro tubing with barbs, 20 1-GPH PC drip emitters and all the necessary parts needed to complete the installation.
Features:
- Use to water roses, shrubs, groundcovers, flowerbeds and trees; ideal for hillsides
- Complete kit; covers up to 700 sq ft (can be easily expanded)
- Contains 11 micro sprayer assemblies, including three 360°, four 180° and four 90° patterns, and 20 1-GPH PC button drip emitters
- Applies water at a very low application rate reducing surface evaporation from leaves and soil
- Micro sprayers are useful as water remains in the upper soil layers where the roots are developing
- Easy to install
- Provides flexibility in irrigation frequency and low application rate minimizes soil compaction and surface runoff
- Designed for new and existing landscapes, including difficult terrain such as slopes and oddly shaped areas
- No special tools or glue are needed
- Save money by significantly lowering the cost of system components compared to conventional irrigation systems
- DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check with local water provider)
Product Specifications:
- Maximum incoming pressure: 100 PSI
- Operating pressure: 25 to 30 PSI (25 PSI preset pressure regulator included)
- Maximum recommended flow rate: 220 GPH (3.7 GPM)
- Poly tubing length & size: 200' x 1/2" with .600 ID x .700 OD
- Micro tubing Length and size: 50' x 1/4"
- 3/4" FHT x MHT pressure regulator: downstream pressure preset to 25 PSI
- PC drip emitter flow rate: 1 gallon per hour (GPH)
- Micro sprayer flow rate: 14 gallons per hour (GPH)
- Total flow rate for this kit: 174 GPH (2.9 GPM)
Kit Includes:
- (1) 3/4" FHT x MHT backflow preventer
- (1) 3/4" FHT x MHT pressure regulator
- (1) Swivel adapter with screen
- (1) 200' of 1/2" drip tubing
- (1) 50' of 1/4" micro tubing
- (3) 360° spray jets on threaded barb
- (4) 180° spray jets on threaded barb
- (4) 90° spray jets on threaded barb
- (20) 1 gallon per hour (GPH) PC drip emitters
- (11) 13" clip spike assemblies with 24" micro tubing and barbs
- (20) 1/4" tubing holder stakes
- (10) 1/4" barbed tees
- (12) 1/4" barb connectors
- (10) 1/2" tubing holder stakes
- (4) 1/2" tees
- (1) 1/2" coupling
- (4) 1/2" elbows
- (1) Hole punch
- (10) Goof plugs
- (4) Figure "8" hose ends
- (1) Instruction manual
How to Use
The Deluxe Drip and Micro Sprinkler Kit can be used in a wide range of layouts to accommodate most garden watering requirements. The kit uses micro sprayers with 360°, 180° and 90° spray patterns and PC drip emitters to provide a full flexibility within the installation. The micro sprayers have no moving parts and distribute the water in a very similar manner to conventional spray heads but with very low flow and with very low application rate. The PC drip emitters in the kit can be used to cover additional individual plants within the layout. This kit contains all the parts required to install a complete system for up to 700 SF. It can be connected into a 3/4" faucet/spigot or a garden hose. If a faucet is not adjacent to the garden or to the location of your drip and micro sprayers irrigation installation, you may extend from the faucet using a garden hose or use additional length of ½ drip tubing (model B35 for 50or B36 for 100). To start the installation, the backflow device can be mounted directly to the faucet or to the end of a garden hose. Please make sure to add the 25 PSI pressure regulator (included) after the backflow preventer. The pressure regulator is used to lower the incoming pressure from the faucet to the recommended operating pressure of 25 PSI, which is within the range of operating pressures for drip irrigation or micro-sprinkler systems.
- The basic installation recommendation for this type of kit is first to review the area and then to make a drawing of the garden or site with your preferred layout.
- In the installation stage, to the faucet, first connect the backflow device, then the pressure regulator and then 3/4" swivel adapter with screen. If water quality is a concern, we highly recommend using a fine mesh 3/4" filter with 155 mesh (model D57A), not included with this kit.
- Lay the drip tubing per your drawing and secure the drip tubing to the ground using the stakes provided.
- Add fittings such as elbows and tees per your drawing layout, leaving the end of the drip tubing open.
- Turn the faucet on to flush the line. Then shut off the faucet and close the end of the drip tubing using the hose end included with the kit
- Install the micro sprayers per the recommended spacing suggested in the instruction manual.
- The drip emitters are installed using one of two methods, either directly into the drip tubing or at the end of the micro tubing with the drip emitters placed under the plant canopy, at the center between the plant trunk and the plant canopy edge. One of the most common installation errors is using too few, and poorly spaced, emitters. Often only a single emitter is placed at the base of a newly planted tree or shrub. In clay soils, a single drip emitter can wet three to four feet in diameter; on sandy soils, however, the same layout using the same drip emitter will only wet an area less than one foot in diameter. Because plant roots can grow a few feet a year depending on the plant and locations, after one year the diameter of the root system might exceed the diameter of the watered area. A single emitter per tree or shrub could therefore restrict root development as early as the first year after planting. For this reason, it is especially important to place additional drip emitters around each plant, early in the plant's life. See soil type section for drip emitter placement.
Note: To expand the kit we highly recommend continuing with the same model micro sprayer and drip emitter components.
Review the instruction manual included with the kit for complete details.
About the soil and suggested drip emitters spacing:
- Sandy soil or light textured soil: Water percolates straight through before it can spread far enough horizontally, so use the drip emitters in close spacing of 10" to 12" apart. Apply water at close intervals such as every other day for 20 to 90 minutes depending on plant size and type, daylight conditions (full sun, partial sun or shaded) and weather pattern (cold to hot) with the plants under full sun in hot conditions getting the longer period.
- Loamy soil or medium textured soil: This is the ideal soil condition with water moving slowly and spreading evenly, so use the drip emitters spaced 16" to 18" apart. Apply water at wider intervals such as every two to four days for 15 to 90 minutes depending on plant size, type, daylight conditions (full sun, partial sun or shaded) and weather pattern (cold to hot) with the plants under full sun in hot conditions getting the longer period.
- Clay soil or heavy textured soil: Water is absorbed very slowly, so install the drip emitters at a spacing of 18" to 24" apart. Apply water at longer intervals such as every three to five days for 30 minutes to 60 minutes depending on flow rate, plant size and type, daylight conditions (full sun, partial sun or shaded) and weather pattern (cold to hot) with the plants under full sun in hot conditions getting the longer period.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 5
good for puppies who like to eat pee pads
Color: Blue, Size: 28" x 34"
this is the only holder that worked for my puppy who loved chewing up pee pads!! good quality holder and the peace of mind makes the price worth it. it's easy to clean if they pee on the edges and helps puppies learn to stay on the pad. only downside in my opinion is that i have to fold the pee pad to make it fit well... not too much of an issue since pee pads already have a crease in them :) definitely recommend!! and i already bought two lol
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
Keeps the pad in place, and looks great.
Color: Dark Gray, Size: 14" x 17", Color: Dark Gray, Size: 14" x 17"
We bought this pee pad tray when we got our little Yorkie. We bought everything to match our white and gray home decor, so this was perfect for that. It's super easy to use. We buy the 22x22 Amazon brand pee pads, and they fit just right, and work great. You can put it on without fussing with folding anything if you want, but it's also very easy to fold the edges really quick for a cleaner look. We do both depending on how busy we are. I've attached pictures of what it looks like either way you do it, and how it looks in the kennel. It's nice that the tray still closes just fine without folding the edges on those busy mornings, and we are very pleased with it.
It's very easy to clean. Usually we just swap the pad out, but we use Lysol wipes most of the time, because sometimes he tracks a little smear here or there on the ring of the tray. I'd soak it once a month just to get a full clean, but the pads are pretty good, so the Lysol wipes are sufficient for the most part.
Our puppy was not affected by adding this tray to the pee pads he was originally trained on. It actually gave us peace of mind when he was tiny and would sometimes play with the pads. He didn't do it often, but he can't do it with this tray, which is good to know. It looks so nice in his kennel. We have this on one side, and his bed on the other. He's a small dog, so I don't know how well this size would work for a dog bigger than 20-25lbs full grown. Our's will only be 5-6lbs full grown and he has no trouble keeping everything on the tray, and has room for multiple potty times.
I want to note that this tray is not 17x17 on the outside. That's the measurement of the pads you should get. It's more rectangular. If I remember, I will look for the measurements and add them to this review once posted, because I didn't realize the actual size when I ordered. UPDATED:Dimensions: 19.33"L x 16.53"W x 1.18"H
Luckily, it fits perfect in half of our 24×36inch kennel, and I'm glad it's not any smaller or bigger. It would not have worked for our needs. I do recommend this. It helps with the look/aesthetics of your pups kennel, and protects the pad from the puppy flipping it and playing with it. It also keeps the mess from getting on his bedding, which makes life a little easier. I hope this and these pictures help.
UPDATE 7/2/20: Our Yorkie is now basically full grown and just over 5lbs vs the 2lbs he was in these picture, and he still fits perfectly on the tray with a couple inches on each side to spare.
I also wanted to update that this didn't seem to slow, and definitely didn't stop his progress in potty training outside, which was a big concern of mine. Once we got really focused with taking him out on schedule, &ALWAYS AS SOON AS he opened his eyes, then of course rewarding with praise &a half of a little training treat after each time using the potty, as well as any time he alerted us that he needed to go outside. He is totally potty trained outside right now, and has been since around or before the holidays. We still keep this in his kennel for those times we may over sleep or when we're not at home incase he can't hold it, especially since he's still a puppy. He has had an occasion pee or poop on the pee pad over the last 7mnths, but it's been rare. I still plan to keep this in until he gets a little older. I'd much rather just switch a pad out than clean a big mess, and launder all of his bedding because of an accident.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 11, 2019
★★★★★ 4
Great idea
Color: Blue, Size: 28" x 34"
This is a great product mainly because it holds down the pads and if anyone has tried to do the inside to outside training that was a huge plus to have it not blowing away constantly the only reason. For the 4 star and not 5 is the middle tends to have a lump of bunch up cause it does not have a section to cover but only way to make this better is to have the top be completely seperate but either way better then most I have tried
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 31, 2026
★★★★★ 5
Great investment! It'll save your floors and help train your pup by giving him/her a specific area to pee/potty in the house!!
Color: Blue, Size: 17" x 23", Color: Blue, Size: 17" x 23"
Though my pup sometimes like to pee right at the edge of this puppy pad holder, when he does, he usually just hits the lip of holder. He's a beagle/dachshund mix, and will probably end up around 20lb - he's around 15-ishlb now - so not a tiny dog, but is still a small dog. And with him being "not" tiny/toy, and him being a male, he tends to not aim so well sometimes when he uses it. This made using the PP holder a learning curve for me.
I started out using the regular size pads in it
, which fit amazing well; however, with Morty's - ahem! - mishaps with aiming, I tried doubling-up on the training pads - would put two of the reg size pads on the holder - and that left just enough pad "hanging" outside of the holder to meet Morty's mishaps in aiming. I was even able to still fasten the holder through the pad, which is awesome!
However, using double to pads to cure Mort's lack of ability to aim for the center every time was costly, so I decided to shop around to see if I could find a solution to our aiming whoes. That's when I stumbled upon these pads at Walmart for just under $10 before tax, but they are available to purchase here at Amazon,
& it occurred to me that perhaps one XL pad would give Morty that extra allowance he needed, and it could be more affordable to me - it worked! .
These particular pads have been working out wonderfully because I continue to use just one pad and still get the overage protection - I'm pretty sure Morty intentionally pees on the edge sometimes - but since they're quite absorbent, it's very rare that he misses so much that he pees "through the pad." [The time he pees through the pad are the times he literally barely even hits the holder/pad at all because like I said, I'm pretty sure he aims for the edge on purpose most of the time.]
Since Morty is a beagle/dachshund mix, he is a scent hound, which means that I can never just "let him outside" - I always walk him outside with a leash - because scent hounds follow their noses [pretty sure his nose is more Beagle than Dachshund lol]. And with it being extremely hot out now, I allow him to pee indoors at least 50% of the time; I am absolutely thrilled that he has taken to his wee-wee pad like a pro.
All and all I'm very satisfied with this purchase because it has allowed us to have a clearly defined, and mostly contained space within out home for our pup Morty, to go potty in the house, and without ruining our hard floors. Moreover, since the holder itself is plastic, cleaning it up is a breeze! I just spray a bit of Clorox Clean-up on the holder, wipe it and voilà - odor-free home!
As an aside; the holder mentions being skid proof, and though I don't doubt the validity in that claim since the feet, which are on the four corners, do have rubber on the bottom, Morty is still a 7-month-old puppy, and sometimes, he can be a bit ornery and play with his pee-pad - which is always fastened inside the holder. And that subsequently allows him to move the holder from it's original spot because he "pulls" it since he's trying to "pull" the pee-pad off. Also, when my daughter and her friends play fetch with him, sometimes they'll throw his tow toward the same area that his holder sits. When that happens, he tends to run across the pad/pad holder and cause it to move. I'm attaching a video to illustrate what I mean. On this particular day Morty was playing by himself with an empty two liter bottle - he loves bottles! On this occasion, his pad/holder is not in it's normal spot - he's actually moved it into the kitchen. Toward the end you can here him baying out the door at someone/thing. I believe it may have been the neighbor lol :)
But since the times that Morty is able to move the holder are during times in which his doing it intentionally, I still wouldn't dock it for "not" being skid proof because it clearly is. I just wanted to point this out in case you furry family member is anything like mine, and is full of energy - I don't think there much of anything in my house Morty can move when he has high-energy like that. Also in the video, you can see how the XL pads fit onto the regular size holder, and the extra overage it provides - should you have a dog like Morty who needs a little extra overhang because of his aiming woes. I've also included photos of my pup, Morty. He'd climbed up on the chair for no reason really, but it's another example of his high-energy :)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 22, 2017
★★★★★ 5
Does what it says
Color: Dark Gray, Size: 22" x 22"
I was using just a puppy pee pad on the floor, but when my puppy started to become rambunctious....she'd quickly grab it and play with it...shred it and try to eat it. I also noticed that she tended to only want to use the edges of the pee pad majority of the time....so I typically ended up with it on the pee pad and then a puddle next to it. I had to do something. On Amazon I go like always and I found this. Didn't even know this existed. Works beautifully. I've had this for around 2 months now. Fits standard pee pads perfectly. It cleans easily. It doesn't hold in any odor. This does not completely keep my puppy from peeing on the floor. This is not the products fault, she aims towards the edges for whatever reason. If anything, it's helped keep more of it in. The raised edges do seem to encourage her to stay inside of it. We rarely have "accidents" now and no more shredding pee pads. See below.
*On another note- she has scratched at the pee pads, like she's digging in the dirt for gold as well as chewed on the plastic a fews times. I was worried I'd have to find another solution. She gets redirected with her chew toys and gets a treat every time she uses it correctly (no chewing or digging). At this time it doesn't seem like it will be an issue that I need to address. She hasn't done it since. So if your dog is determined this will NOT stop them. This product is not indestructible, please know this! It can be chewed on and if determined they can still get to the pee pad. I don't understand why some people rate it poorly when the product is doing what it's "intended" to do. You just have to know your situation and find the best solution you can live with. A dog is going to be a dog. Please address why they are doing what they're doing to begin with. I realized that my pup (*puppies will chew) wasn't getting enough mental stimulation, she's an Aussie. She had physical but not enough mental stimulation. Combine that with making sure we only encourage the wanted behavior and simply dismiss the unwanted behavior. I'm not saying I'm a pro, far from it... nor is everyone's situation the same....I'm just saying don't expect a product to do your job, expect what it says it's intended use is for. :)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 27, 2024