Pay in installments of $6.46 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 9 - Aug 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
joolz geo vs geo 2 Joolz Geo 2 Earth Mono StrollerSpecifications Stroller Weight: 30 lbs Age Weight Capacity: Birth to 45 lbs Open Dimensions (in): 33 x 24 x 37? 43 Folded Dimensions: 38 x 24 x 22 What's Included: Chassis, seat cot frame, seat cot fabric, XL basket What's NOT Included: Cup holder, child tray The seat transforms into a bassinet for a safe and cozy environment perfect for newborns. The Geo's 3 position recline includes a flat setting for naps on the go. The adjustable handlebar allows
30 lbs
Birth to 45 lbs
33 x 24 x 37? 43
38 x 24 x 22
What's Included:
What's NOT Included:
Cup holder, child tray
The seat transforms into a bassinet for a safe and cozy environment perfect for newborns.
The Geo's 3-position recline includes a flat setting for naps on the go.
The adjustable handlebar allows parents of any height to stroll comfortably.
The Geo stroller folds in one motion, and the transport lock holds the chassis together for easy carrying.
You?re prepared for everything with the Joolz Geo2. After a trip to the grocery store, the XXL basket holds all your shopping and more. A new baby on the way? Whatever life brings ? a second baby or twins ? the Joolz Geo2 will simply grow with your family while remaining compact and maneuverable, handy on the bus, in the park or shopping. Taking the car? In just one motion, the Joolz Geo2 folds up as a compact one-piece fold. That's right, with the Joolz Geo2 you are ready for every family adventure.
The Joolz Geo2 Mono can be used with a spacious bassinet or seat on top and a XXL basket underneath. It?s simple to extend to Duo or Twin as your family grows.
The Stroller
The Joolz Geo? is the ultimate companion for every family adventure. The modular design offers three different configurations, ready for any challenge. Even with two kids on board, you remain perfectly mobile thanks to the one-hand steering and width of just 24 inch. Shopping, picnicking, or a trip to the playground: there is plenty of room in the easy-access XXL basket. The stroller folds up in one smooth motion and even with two seats it is a compact one-piece fold.The Bassinet
The ergonomic bassinet of the Joolz Geo2 is spacious, so your baby can lie down for as long as needed. The mattress is hypo-allergenic and breathable for a comfortable and safe sleep. The bassinet always comes with an XL canopy where the extended sun hood offers shade and the air-top ensures airflow. And thanks to the bassinet?s high position, you'll never have to bend down deep for a hug. Your back will thank you.The Seat
The seat of the Joolz Geo2 is an ergonomic feat. Whether lying down, sitting up or snoozing, its design offers your baby's body optimal support. If you?re at home or out for a coffee, the seat is perfectly at table height, so you can pull it right up to your table. Thanks to its high position, there's no heavy lifting involved. The harness remains in an open, upright position and comes with a 5-point buckle, so your child is seated quickly and safely. All that's left to do is choose which way they'll face, for bonding time with you or exploring the world.Features:
- Premium award-winning Dutch design: Designed in The Netherlands. A streamlined chassis, leatherette touch points and sophisticated fabrics. All you have to do is add your baby.
- Future- & twin-proof: Handy to know that you can easily extend the Joolz Geo2 if a second baby ever or twins come along. One design fits every family situation.
- Large bassinet: The Joolz Geo2 bassinet is spacious so your child can lie down comfortably for as long as needed.
- Hypo-allergenic mattress: We?d all like to sleep on something like that: a roomy bassinet with a hypo-allergenic, breathable mattress.
- XL canopy with air-top: To protect your baby against the warm sun, our extended sun hood offers shade. The air-top ensures your baby gets fresh air and is in contact with you.
- High bassinet and seat: When seated in a restaurant, just pull your little one up to the table. So, you'll never have to bend down deep for a hug. Your back will thank you.
- Three ergonomic seat positions: The seat is reversible and has three reclining seat positions. Your little one can look freely into the world, or face you instead. The ergonomic design provides ultimate lying and sitting comfort.
- Safe and upright, open harness: Because the harness stays upright in an open position, the Joolz Geo2 receives your child with open arms. And, your baby is seated safely, thanks to the 5-point buckle.
- Ergonomic bumper bar: The bumper bar can be opened with one hand, from both sides?even with a child on your arm. The bumper bar is designed to safely carry the bassinet.
- Adjustable handlebar: Moms or dads, grandmas or grandpas, and the babysitter: they can all walk with a straight back and there is enough space for big or small steps.
- Easy to maneuver: In any configuration, the Joolz Geo2 can easily be steered with just one hand in small shops, narrow alleys or on the subway.
- Four-wheel suspension: This is the four-wheel drive of strollers. You can push it over bumps and forest trails while your child sleeps soundly.
- Toy hanger loops: Monkey, Giraffe and Mouse: together with his best friend, your little one discovers the world. Thanks to these smart toy hanger loops, you can suspend them from the canopy.
- Easy-access XXL basket: Shopping, picnicking, or a trip to the playground: the XXL easy-access basket carries it all for you. Going to the market? All your groceries will easily fit.
- Super smooth one-piece fold: In one motion, the Joolz Geo2 is folded up. Even with two seats it is a one-piece fold. Easy-peasy! And it fits inside everything.
- Ultra-light and puncture-proof tires: The tires are made of ultra-light rubber foam. And they are 100% puncture-proof so you are never stranded with a flat.
- Compact size: In the elevator, on the subway, or navigating a narrow aisle. With a width of just 24" you stay mobile, even with two kids on board.
- Lockable swivel wheels: Strolling down a cobblestone road or a bumpy forest trail? Just lock the swivel wheels and off you go! Incredibly smooth, from market square to forest terrain.
- Car seat adaptable: With the help of the car seat adapter, the Joolz Geo2 is compatible with major car seat brands.
Specifications:
Dimensions:- Open dimensions: 33 x 24 x 37? 43 in
- Folded seat/XXL basket: 38 x 24 x 22 in
- Folded seat/seat: 38 x 24 x 22 in
- Folded without seat: 36 x 24 x 12 in
- Folded without wheels: 36 x 19 x 10 in
- Upper bassinet: 31 x 13 x 8 in
- Upper bassinet mattress size: 31 x 13 x 1.2 in
- Chassis: 20 lbs
- Chassis without wheels: 13 lbs
- Seat: 6 lbs
- Bassinet: 9 lbs
- XXL basket: 4 lbs
- Weight capacity XXL basket: 22 lbs
- Weight capacity Joolz Geo?: 90 lbs (45lbs/seat)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 14 reviews
Sort
Product Reviews
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review.
I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work.
This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine!
My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs.
I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away).
Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?"
I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks.
One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration.
The Creality titles the g-code with a filename that includes the estimate print time.
I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then.
What I like about the machine.
1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications.
2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all!
3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed!
4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use.
5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement.
What I do not like:
1) The SD card has to be put into its slot upside down.
2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine.
3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had.
4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out.
I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you.
A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine.
Now for the machine itself...
The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great.
If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front.
Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want.
I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.)
I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026