SKU: 92980581497
succulent soil vs potting soil

succulent soil vs potting soil Molly's Gritty Mix for Cactus & Bonsai

Sale price$20.62 Regular price$22.91
Save 10%

Pay in installments of $5.73 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 3 - Oct 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

succulent soil vs potting soil Molly's Gritty Mix for Cactus & BonsaiQuick answer: what is Molly's Succulent Mix? For: succulents, cacti, bonsai, Haworthia, Echeveria, Sedum, Jade, and any arid environment plant. What's in it: high mineral gritty blend of pumice, lava rock, and crushed bark. Low organic matter by design. Why it works: succulent roots are built to drink fast and dry out fast. The gritty structure drains in seconds and holds zero standing water, so roots don't rot. Pre rinsed and pH balanced straight

Quick answer: what is Molly's Succulent Mix?

  • For: succulents, cacti, bonsai, Haworthia, Echeveria, Sedum, Jade, and any arid-environment plant.
  • What's in it: high-mineral gritty blend of pumice, lava rock, and crushed bark. Low organic matter by design.
  • Why it works: succulent roots are built to drink fast and dry out fast. The gritty structure drains in seconds and holds zero standing water, so roots don't rot.
  • Pre-rinsed and pH-balanced straight from the bag. No salt flush required.
  • Bonsai-safe. The grit profile matches what serious bonsai growers blend by hand from akadama, pumice, and lava.

More plant-specific guidance: Ultimate guide to growing succulents indoors, Potting soil vs potting mix.

Succulents and cacti evolved in arid, mineral-rich environments where water moves through gritty substrate in seconds. Their roots are built to drink fast and dry out fast. Standard potting soil holds moisture for days, suffocates the roots, and rots them from the bottom up. The fix is a high-mineral, low-organic, gritty mix.

Molly's Succulent Mix is engineered to mimic native desert and rocky-slope substrates. A blend of pumice, lava rock, and a small amount of organic matter that drains in seconds and forces the soak-and-dry watering rhythm succulents need.

The gritty-mix philosophy

Most "succulent soil" sold at garden centres is regular potting soil with sand mixed in. That's not what these plants want. The right mix is roughly 70% mineral aggregate (pumice and lava rock) and 30% structural organic (coir, charcoal). Water hits the surface and runs through within seconds. Roots get a brief, intense drink, then dry conditions for the next 1 to 2 weeks. That's how succulents stay alive in pots.

What's in the bag

  • Pumice (volcanic, lightweight): the mineral backbone. Holds a tiny amount of water inside its porous structure, but lets the rest drain freely.
  • Lava rock (red lava): chunky drainage and heat retention. Roots love the warmth differential it creates.
  • Coir fiber (small percentage): just enough organic to retain a little humidity and prevent the mix from drying to a brick. Not enough to compromise drainage.
  • Horticultural charcoal: filters salts from tap water (succulents are surprisingly sensitive to mineral buildup).
  • Calcitic limestone (trace): buffers pH to the slightly alkaline range (6.5 to 7.5) most desert succulents prefer.

Low peat content, no worm castings (succulents don't want a nutrient flush), no commercial fertilizer. The whole mix is intentionally lean.

Plants this is for

Designed for succulents and cacti:

  • Echeveria, Sedum, Crassula (jade), Sempervivum: the classic rosette succulents.
  • Haworthia, Gasteria: they prefer slightly more shade but want the same gritty drainage.
  • Aloe (vera and others): medicinal succulents, this mix prevents the rot they're prone to in heavier soils.
  • Most cacti: Mammillaria, Echinopsis, Opuntia, San Pedro, golden barrel.
  • Lithops (living stones): require fast drainage to stay alive year-round; this mix is well-suited.
  • Bonsai with high drainage needs: juniper, pine, and certain deciduous bonsai work well.
  • Caudex plants: Adenium, Pachypodium, and other swollen-stem species that need fast drainage at the base.

Not for: tropical "succulent-looking" plants like Hoya, Christmas cactus (Schlumbergera), or Easter cactus, which actually prefer humidity-retaining mixes. For those, use Molly's Aroid Mix.

Watering with gritty mix

The right rhythm: soak and dry. Water deeply, then wait until the mix is bone-dry before watering again.

  1. Wait until the top 2 to 3 inches feel completely dry. For most succulents in standard 4 to 6 inch pots, that's every 10 to 21 days indoors.
  2. Water until liquid runs clearly out the drainage holes. Don't dribble. Soak.
  3. Discard any water in the saucer. Do not let the pot sit in standing water.
  4. Wait. The plant will let you know when it's thirsty (slight wrinkling of leaves, lighter pot weight).

In winter, water roughly half as often. Most succulents go dormant or semi-dormant.

FAQ

Why is this so heavy compared to other succulent soil?

Because it's mostly minerals, not peat or coco coir. The weight is what makes it work. Light bag means light drainage, which is the opposite of what succulents need.

Can I use this for bonsai?

For tropical bonsai, no, they want a moisture-retentive aroid-style mix. For drought-tolerant bonsai (juniper, pine, certain deciduous species), yes, this mix or a 50/50 blend with finer organics works well.

Will the mix break down or stay porous over time?

Stays porous. The mineral components (pumice, lava rock, charcoal) don't decompose. The small organic fraction breaks down slowly. Most succulents in this mix can go 2 to 3 years before repotting.

Should I add fertilizer?

Sparingly. Succulents are slow growers and don't need much. A diluted (~1/4 strength) cactus-specific fertilizer once during the growing season (spring) is plenty for most species.

Packaged in a heat-sealed resealable bag. New formula released April 2026, see the formula release announcement for details on what changed.

Related care guide

Watering, light, and repotting fundamentals for succulents and cacti.

→ Read the Succulent & Cactus Care guide

Have questions? Read the Molly's Succulent Mix FAQ for detailed information on watering, repotting, and which succulents this mix works best for.

New: the complete soil guide

Not sure if you need cactus soil or succulent soil? They are the same thing. Read: Best Soil for Succulents and Cactus →

Not sure which mix your plant needs?

Take our free 60-second Soil Finder quiz → Diagnose the problem and get the exact Molly's mix and amount for your plant, plus 10% off.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 92980581497

Discover Niche Categories That Outsell succulent soil vs potting soil

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Robert O. Forsyth Jr.
Pawtucket, US
★★★★★ 1
JUNK, Cheaply built, Feed Scanner fails and falls apart in less than 5 months and only 4 uses.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Absolute piece of Junk! Built cheaply. Feed Scanner has never worked properly from my first scan (only did 4) and now falls apart completely, in the roller section. It falls out after it jammed for the 7th time today, this time with a SINGLE piece of paper. If you have a piece of paper that has a fold in it, forget about it. That will never feed through. I had 6 sheets I had to get out today, I had to do manually via the flat bed, both sides. It took 23 minutes to get done. Should not have taken 2. The last time I used it same issues but less sheets. The paper is SO TIGHT in the feed section it is hitting BOTH walls. You could not slip a piece of paper in there if you wanted too, most likely one of the reasons it does not feed correctly. While on the phone with support (I am right now, 4th call today and 3 emails of pictures they wanted later, the hoops they put you through is ridiculous!) Of course overseas support and has little to no knowledge of being Tech support, I asked for supervisors only to have my first call disconnect at 1 hour and 20 seconds. Then the next call was 24 minutes, then another 32 minutes and now this one still ongoing (56 minutes and still going). Now after 3 hours and 5 minutes, they are "holding" my credit card for 179.99 + tax to get a REFURB unit! So much for a 5 year Warranty. Oh they acted like it was out of date on Warranty, it has NOT been in EXISTENCE for 5 years , it came out in 2022. Did I fail to mention you WILL be dealing with Overseas people who have you repeat the same thing over and over and over and over again. They wonder why I was getting upset...hmmmm . As they pass you along the ranks you have to repeat EVERYTHING all over again. As I was on the phone and they were asking me to open WRONG doors to find the serial #, I lifted once again the Jam area and guess what, the parts fell out. Just PLOP! Other issues while I am at it, the Picture quality is "OK" nothing special. I bought it to save ink as HP gouges you to death and destroys your print head if you use a knockoff. The Ink has been "OK", but I haven't really had it long enough to tell as most everything has been Black and White, so all are still full except the Black (3.4's). Its a rear feed, I miss the HP draw on that, the print speed again is not fast, just OK. Though never really in a rush with it. I cant say it enough, this is cheaply built, and my experience with Tech Support was a HORRIFIC. I never like dealing with Over seas support as it is, but what they wanted pictures of as proof was mind blowing (pictures of the tubes that go to the ink wells? What does that have to do with the issue at hand.) The panel function is anything but user friendly. Firmware Updates, if not done, will prevent usage until done. You have to download and install ALMOST 30 different files, from drivers to firmware updates the list is endless. Never have I had to do that many of ALL printers I have had combined. Simple ZIP file and let it run on an executable file (EXE)like everyone else. That will take you over 2 hours to get all loaded. The ink wasn't bad seeing it needs to be primed first to work, I am not sure what will happen when the REFURB comes, will I get ink or just have to re-prime from the cartridges. The software for scanning is easy to use, though unnecessary, should just scan and auto save, or am I just spoiled by HP? But to send me a "REFURB" as a replacement on a 5 month old unit with a 5 year warranty is really being low. They did EVERYTHING they could to get me to NOT follow through in this return, you have ONLY 30 days on Amazon. You have been warned, I would look elsewhere, the tank issue is a great Idea, but if it doesn't work, what good does it do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
M
Verified Purchase
Michael A. Adkins
Fort Morgan, US
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist. Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking. Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks. Features, * The printer dues Dual-Sided Print - Great for zines. * It has fax capability, but we do not have a landline, so that will not be used. * It does copying, with a document feeder or you can lift the feeder and place the document on the glass. * I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document. * Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do. Print Alignment. I did this test but the printer heads did not require any alignment. During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed. The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer. Negatives. The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this. So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up. So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards. As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on. One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
E
Verified Purchase
Edisson Salazar
Massapequa, US
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025
I
Verified Purchase
Irving M. Lamansky
Boise, US
★★★★★ 5
ET-4800 EZ PZ set up and start up. Prints and scans just fine
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
An excellent home printer. And why did I purchase such? I had an Epson WF-520 for nearly ten years. But neglect and lack of use caused the printer head to get gunked up. I cleaned the print heads using a solution of 95% Etoh and glass cleaner (about fifty/fifty), a syringe with a plastic tube attached and LOTS of paper towel strips. It was moderately successful but I was never able to get it back to like new printing. I looked over several new printers and wanted to stay with Epson because of ease of use (copy, scanning, printing). Seems as tank printers are the way to go these days. So I ordered the ET-4800. Got here in only a couple of days. Setup was pretty easy, just follow the instructions either via the documentation included or online version. I have pinted and scanned a color test page. I used the built in SmartScan feature without having to think about it much. I am quite satisfied with the results. By the way, there is no automatic two side printing. You actually have to get off your b---, take out the first printing, turn it over and refeed the stack. I was used to doing that with the old WF-520 and never had a problem. I will now set up a once a week, automatic scheduled printing task. I will just have to make sure there is paper on hand. Lack of use is the killer of these inkjet machines regardless of manufacturer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026
T
Verified Purchase
Thomas Weaver
Omaha, US
★★★★★ 5
The intensity of the higher DPI and other settings makes this a marvelous Printer.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I am a former Canon product user for years. I became disappointed two printers ago. Support is horrible. So, I ordered this Epson. Initially, because of the differences I was somewhat confused on the set-up; however, once completed, I can completely endorse this product. The printing is absolutely tops. The ink system is fantastic. AND, it has fax capabilities which I tested and works great. Can not say enough good things about it. I specialize in historical photo and documentation restoration - and this printer works GREAT.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026

recommand products