camouflage car seat and stroller set Camo 4 Piece Bass Boat Seats (Set of 2)

camouflage car seat and stroller set Camo 4 Piece Bass Boat Seats (Set of 2)Your boat will look new again with these plush Camo, 22. 5" wide bass boat seats. Sold in pairs, these factory grade replacement bass boat seats feature a 2 piece design for easy installation. Backrest and seat cushions mount separately for easy installation. The center back rest cushions are attached with velcro, simply pull them out and use the included stainless screws to secure the backrest against the rear wall of your seating platform. Seat

Your boat will look new again with these plush Camo, 22.5" wide bass boat seats. Sold in pairs, these factory grade replacement bass boat seats feature a 2-piece design for easy installation.

• Backrest and seat cushions mount separately for easy installation.
• The center back rest cushions are attached with velcro, simply pull them out and use the included stainless screws to secure the backrest against the rear wall of your seating platform.
• Seat cushions attach using pre-installed hinges, simply screw them down to your seating platform and cover with pre-installed matching vinyl flaps.
• Our design allows you to install the seats properly on any size platform and you'll be able to hinge the seat cushions forward if you have storage.

Protect your investment with our DeckMate Seat Cleaner and Protectant 

Seat Dimensions

Installation

Installing Back Rest & Seat Cushions 

1. Remove the temporary plastic edge protectors from each boat seat cushion by pulling them out of the upholstery. This will not harm the seat, simply grab the edge of the plastic protectors and pull them out.

2. Determine the location of the drivers bucket seat and place the backrest against the rear wall of the seating platform. Secure the back rest to the rear wall of the seating platform with provided screws. If necessary drill more holes through the plastic frame for mounting, this will not damage the seat or void any warranty.

* If you have ordered a seat grouping with a center fold down seat make sure you line up all your boat seats on the boat’s platform prior to installation to make sure you have enough room to install each seat.

* We recommend that you drill small pilot holes into your boat before installing the screws. This will prevent damage to the fiberglass. Assuming a 3/4” thick back wall our 2” screws will protrude 1/4” through your back wall of your platform once installed.

3. Line the seat cushion up with the installed back rest and determine the spacing between the seat and back rest. The hinge that is attached to the bottom of each seat cushion allows you to adjust the seat forward or back depending on the depth of your platform. There is a matching vinyl piece that is installed with each hinge, determine the location and screw the hinge and the vinyl to the platform. The vinyl piece will hide the aluminum hinge once it is installed.

4. If you have a center fold down seat, determine where you want it to mount and install it with the attached hinge and vinyl piece just like you did with the bucket seat cushion.